Contents
Water is a vital element of any apartment or house. The presence of a central water supply allows residents of the house not to think about where and how water enters the house. But if there is no running water in the settlement, then the well often becomes the only source of water. Our ancestors successfully extracted water from the well using a bucket. However, today people have become more demanding on the level of comfort. Therefore, well pumps help to solve the problem of raising water to the surface. A wide range of models is presented on the domestic market. Pumps differ in price and functionality. Our experts will help you choose a well pump, taking into account the requirements of consumers.
Recommendations for choosing a pump for a well
Installation method. All well pumps can be divided into two categories according to the installation method.
Surface models are mounted on the surface of the earth (outbuilding or house), and only a suction hose is lowered into the water. Most often, such pumps are designed to extract water from a mark of 6-10 m. The strengths of surface units include high throughput and good pressure. Experts consider this type the best option for summer use.
Submersible pumps are completely lowered into the water, they spend all their working time at the lowest point of the well. The advantage of this installation method is a large suction depth (up to 200 m). During operation, users do not hear the noise of the running pump, the pump can be controlled by automation. Deep-well pumps are an excellent option for year-round water supply at home.
Types of well pumps. There are several designs of water pumps. Today, two types are most in demand.
Centrifugal pumps have a long service life, unpretentiousness in water purity, and high power. The pump will be a universal assistant, with its help it will be possible to establish a modern water supply system or water the garden in the summer heat.
Vibratory pumps attract potential buyers with a low price. They are in high demand among summer residents, who are ascetic in terms of convenience in the house, but give all their strength to growing plants. Vibratory pumps lift water from great depths, while allowing you to quickly fill containers or install several sprinklers on the site.
Main technical characteristics. When choosing a well pump, a potential buyer should get acquainted with several important technical parameters.
Performance or throughput shows the volume of water that the pump will pump in a certain time. Usually in the passport the value is indicated in liters or cubic meters per hour. To provide water to an average house, a device with a capacity of 1,5 to 3,0 cubic meters is enough. m/h
The maximum pressure, in fact, is the maximum pressure that the pump is capable of delivering. For ease of calculation, this indicator is expressed in meters. It is generally accepted that the height of a water column of 10 m is equal to a pressure of 1 atmosphere.
The immersion depth is an important parameter, it shows how far the pump or hose can be lowered into the well so that there is enough power to raise the water. Before buying a pump, you should perform a simple measurement of the depth of the well using a rope with a load.
The length of the power cord also depends on the depth of immersion. Manufacturers on the same models can install a wire with a length of both 10 m and 40 m. It should be borne in mind that if you build it yourself, the warranty on the device will cease to be valid.
Control. To extend the life of the pump and ensure user comfort during operation, modern models are equipped with various control systems.
The float switch allows you to set the device to turn on and off, based on the water level in the well. The accessory is especially relevant in cases where the pump pumps out water faster than it enters the well from the bowels of the earth.
The pressure switch turns off the pump when the water pressure in the line drops below a predetermined mark.
The dry running sensor monitors the presence of liquid in the pump chamber. As soon as air enters the pump, the device turns off.
For our review, experts selected the 15 best pumps for a well. All these models can be bought in specialized stores in Russia. In the process of distributing positions, the editors of the magazine simplerule relied on the opinion of the expert community, taking into account the opinion of domestic users.
What is better pump or pumping station for a well
Pump type | Advantages | Disadvantages |
Pump (submersible) | + affordable price + minimum noise level + large suction depth + unpretentiousness | – service life depends on tightness – Attracts the attention of thieves |
Pumping station (surface) | + can be mounted indoors + easy to connect + ease of maintenance + ability to move | – higher price – small suction depth |
Rating of the best pumps for a well
Nomination | Place | Name of product | Price |
---|---|---|---|
The best centrifugal submersible pumps for wells | 1 | Pedrollo NKm 2/2 – GE | 33 650 ₽ |
2 | Grundfos SQE 2-55 | 39 400 ₽ | |
3 | Vodolej BCPE 0.5-100 | 20 600 ₽ | |
4 | Belamos TF3-110 | 13 060 ₽ | |
5 | UNIPUMP ECO FLOAT-3 | 12 600 ₽ | |
Best Automated Submersible Well Pumps | 1 | DAB DIVERTRON 1200 M (1100 W) | 24 500 ₽ |
2 | Grundfos SBA 3-45 A | 26 060 ₽ | |
3 | Aquario ASP2-40-100WA (750 W) | 11 060 ₽ | |
4 | GILEX Water jet PROF 55/50 A df (600 W) | 11 700 ₽ | |
The best vibration pumps for wells | 1 | BELAMOS BV-0.12 10 m (280 W) | 1 670 ₽ |
2 | VORTEX VN-15V (280 W) | 1 690 ₽ | |
3 | LEPSE Aquarius-3 10m (265 W) | 2 140 ₽ | |
4 | LIVHYDROMASH Malysh-M BV 0,12-40 10m (240 W) | 1 750 ₽ | |
The best surface pumps for wells | 1 | Hammer NAC 1000A (1000 W) | 6 790 ₽ |
2 | GARDENA 3500/4 Classic | 9 790 ₽ |
The best centrifugal submersible pumps for wells
Reliable and quiet operation attracts potential buyers of submersible centrifugal pumps. They allow you to organize uninterrupted water supply at home or organize irrigation of a personal plot. The experts liked the possibilities of the following models.
Pedrollo NKm 2/2 – GE
Rating: 4.9
Reliability and durability are the main characteristics of the submersible well pump Pedrollo NKm 2/2 – GE. The model can be successfully used in the organization of water supply at home or for irrigation of a personal plot. Experts note the combination of high throughput (4,8 cubic meters per hour) and low power consumption (550 W). The pump provides a maximum head of 48 m at a immersion depth of up to 20 m. The model’s asset should also include the function of increasing pressure, protection against dry running and a float type switch. The Italian submersible pump becomes the winner in our review.
Domestic consumers have no comments on the operation of the pump. In the reviews, they praise the appliance for reliability, efficiency and quiet operation.
Advantages
reliability and durability;
high performance;
economy;
quiet work.
Disadvantages
not found.
Grundfos SQE 2-55
Rating: 4.8
Small diameter (74 mm) and lightness (5,2 kg) make the Grundfos SQE 2-55 submersible pump a versatile device for supplying water to a house or watering a garden. The model is slightly inferior to the winner in terms of throughput (3,4 cubic meters / h) and power consumption (1020 W). But at the same time, the pump looks decent in terms of pressure (71 m). The experts appreciated the presence of such a function as a soft start, thanks to which the model has become more durable. The manufacturer has equipped its product with protection against dry running and overheating. The pump withstands voltage fluctuations in the mains from 150 to 315 V. The pump takes an honorable second place.
Domestic users are satisfied with the quality assembly, ease of installation, and a wide range of applications. Of the minuses, they highlight only the high price.
Advantages
versatility of application;
durability;
high-quality assembly;
resistance to voltage drops.
Disadvantages
high price.
Vodolej BCPE 0.5-100
Rating: 4.7
The Vodolej BCPE 100-0.5 pump has the largest immersion depth (100 m). At the same time, the model is far ahead of its competitors in terms of maximum pressure (150 m). Such high performance of the pump is provided by a powerful electric motor (1950 W). The performance of the unit reaches 3,6 cubic meters. m/h The experts gave the pump the bronze of our review for the optimal combination of technical parameters and cost. The only drawback of the product can be called a large weight (25 kg).
Domestic users note the complete set of the pump, the manufacturer supplies both the cable and the safety cord. The pump pumps quietly and smoothly. Some owners did not like the output of the cord from the side, because of which it can cling when lowered or raised.
Advantages
great immersion depth;
high pressure;
affordable price;
quiet work.
Disadvantages
side output of the cord;
a lot of weight.
Belamos TF3-110
Rating: 4.6
At the most attractive price, the Russian-Chinese pump Belamos TF3 TF3-110 is sold on the domestic market. Of the advantages of the model, experts note a high head (110 m), a decent immersion depth (80 m). The pump is somewhat inferior to the leaders of our review in terms of throughput (2,7 cubic meters / h). The durability of the product is ensured by a stainless steel case. The manufacturer has installed automatic thermal protection of the engine on its product, so the owner does not have to worry about overheating.
Russian consumers liked the model for its low price, reliability, and quiet operation. The pump produces the declared parameters without any problems, which, according to users, is due to a powerful (1200 W) electric motor. Some owners are unhappy with the frequent operation of thermal protection.
Advantages
low price;
high pressure;
good immersion depth;
quality assembly.
Disadvantages
heavy weight (21 kg);
The thermal protector kicks in frequently.
UNIPUMP ECO FLOAT-3
Rating: 4.5
A worthy representative of budget well pumps is the UNIPUMP ECO FLOAT-3 model. The pump is ahead of competitors in terms of performance. In an hour, the unit lifts up to 5,1 cubic meters of water from the well. The immersion depth is limited to 20 m, and the maximum head of the electric motor with a power of 480 W is 49 m. Experts praised the manufacturer for the presence of a float switch and protection against dry running. The combination of the top water intake and strainer prevents dirt from getting inside the pump. The model closes the top five best centrifugal submersible pumps for a well.
The owners praise the pump for an affordable price, high-quality assembly, and ease of operation. Some users complain about the fear of getting sand grains.
Advantages
low price;
high throughput;
float switch;
dry run protection.
Disadvantages
demanding on water quality.
Best Automated Submersible Well Pumps
A good alternative to pumping stations are automated submersible well pumps. With their help, the problem of water supply to the house is solved or drip irrigation is being established in the garden. Experts drew attention to several models.
DAB DIVERTRON 1200 M (1100 W)
Rating: 4.9
The DAB DIVERTRON 1200 M automated pump allows you to quickly and inexpensively organize water supply in a private house. The presence of automation and an electronic switch makes it possible to do without a hydraulic accumulator. Experts note the ease of use, the device can be used in the “smart home” system. The pump is seriously ahead of its closest competitors in terms of throughput (5,7 cubic meters / h). The pump is able to lift water from a depth of 12 m, providing a maximum head of up to 46 m. A reliable non-return valve should be added to the asset of the product. The model wins gold in our review.
Domestic users speak flatteringly about the ease of connection, silent operation, and high performance. The model is unpretentious, it winters in the well without any problems.
Advantages
electronic switch;
high performance;
easy connection;
unpretentiousness.
Disadvantages
not detected.
Grundfos SBA 3-45 A
Rating: 4.8
The Grundfos SBA 3-45 A well pump looks a little more modest in terms of technical characteristics. The model demonstrates a throughput of 3 cubic meters. m / h, the immersion depth is limited to 10 m, and the maximum head is 45 m. Automation allows you to organize uninterrupted water supply without the use of an expansion tank. But the pump takes the silver position in the review for the high build quality, which is noted by both experts and users. It is enough to lower the pump into the well to forget about the problems with the water supply of a private house for a long time.
In the reviews, the owners praise the pump for quiet operation, good power (1050 W), ease of use and durability. All necessary accessories for connection are included. The only downside is the high price.
Advantages
high-quality manufacturing;
quiet work;
automation of water supply;
good power.
Disadvantages
high price.
Aquario ASP2-40-100WA (750 W)
Rating: 4.7
The leader among automated submersible pumps for a well in terms of maximum head (70 m) is the Aquario ASP2-40-100WA model. The pump is able to provide consumers with water, being at a depth of 15 m. The performance of the unit is 3 cubic meters. m/h The model is equipped with a float switch, the body is made of stainless steel. The manufacturer supplies his product with a 25 m network cable and a remote starting unit. The pump also has dry running protection. The Italian pump becomes the bronze medalist of our review.
Domestic users have no serious complaints about either the build quality or the cost. The pump successfully copes with the water supply at home, working quietly and for a long time. The disadvantages include a fairly large weight (11 kg).
Advantages
high pressure;
durable body;
long power cord;
quality assembly.
Disadvantages
a lot of weight.
GILEX Water jet PROF 55/50 A df (600 W)
Rating: 4.6
The low price and economical power consumption (600 W) allowed the Russian pump JILEX Vodomet PROF 55/50 A df to get into our review. Experts appreciated the immersion depth (30 m), according to this indicator, the model bypasses even the winners. Such a parameter as the maximum head (50 m) also looks worthy. The pump capacity is 3,3 cubic meters. m/h, while the size of the sand grains can reach 2 mm. The model is equipped with a float switch, there is protection against dry running and a bottom filter. The service life of the product is 10 years.
Russian consumers praise the pump for the combination of low price and high quality. The unit works silently, well pumping water from deep wells. The owners did not like the check valve, because of which there were problems with starting.
Advantages
low price;
high quality;
great immersion depth;
unpretentiousness.
Disadvantages
due to the check valve, an air lock is formed.
The best vibration pumps for wells
Vibrating well pumps are very popular with summer residents. They attract attention with their low price, unpretentiousness and simplicity of design. The following products are of good quality.
BELAMOS BV-0.12 10 m (280 W)
Rating: 4.9
The BELAMOS BV-0.12 vibration pump is easy to use and maintain. Buying a pump is a budget option for solving the problems of water supply of a private house or irrigation of a personal plot. The experts gave the product the laurels of the winner for the durable stainless steel case, reliable design and unpretentiousness to water quality. The strength of the pump is the maximum head (70 m). The immersion depth is limited to 3 m, the performance of the unit is 0,43 cubic meters. m/h Against the background of competitors, the model stands out with a powerful electric motor (280 W).
The owners liked the pump for its low price, simplicity, reliability and reliability. The only drawback of this modification is a short power cord (10 m).
Advantages
simplicity and reliability;
low price;
good pressure;
unpretentiousness.
Disadvantages
short power cord.
VORTEX VN-15V (280 W)
Rating: 4.8
Vibration pump VORTEX VN-15V combines high head (72 m) and decent performance (1,08 m15/h). The model is in steady demand among Russian homeowners. The time-proven vibration mechanism with honor withstands the most difficult tests. The pump does not act up when sand or silt gets in, and the stainless steel body remains operational for many years. The unit is also resistant to overloads, the experts pumped water for days on end, unsuccessfully trying to disable the device. The pump comes with a XNUMX m cable and a submersible rope. The model receives the silver of our review.
Users note such strengths of the pump as strong pressure, affordable price, ease of dismantling and cleaning. Of the shortcomings, noisy work is noted.
Advantages
strong pressure;
good performance;
unpretentiousness;
ease of maintenance.
Disadvantages
noisy work.
LEPSE Aquarius-3 10m (265 W)
Rating: 4.7
The vibration pump LEPSE Aquarius-3 finds a wide scope of application. This conclusion was made by our experts after analyzing the reviews of domestic consumers. The pump is used to supply water from deep wells (immersion depth up to 40 m), rivers, lakes, for pumping melt and groundwater from cellars and garage pits, for watering the garden and vegetable garden. The manufacturer protected the lower part of the pump housing with a special rubber pad. The asset of the model should also include a convenient location of the bolts, it will not be difficult to unscrew them with an ordinary open-end wrench. The pump becomes the bronze medalist of our review.
In the reviews, the owners praise the unit for reliability, unpretentiousness, ease of maintenance and maintainability. The disadvantages include a lot of weight and a short power cord.
Advantages
wide scope of application;
unpretentiousness;
maintainability;
rubber pad.
Disadvantages
short cord;
a lot of weight.
LIVHYDROMASH Malysh-M BV 0,12-40 10m (240 W)
Rating: 4.6
The largest throughput (1,5 cubic meters per hour) among competitors in the segment of vibration pumps can boast of the LIVHYDROMASH Malysh-M BV 0,12-40 model. The pump is most often bought by Russian summer residents for watering a personal plot. The maximum head of the product is 60 m, the suction depth is limited to 3 m. The electric motor consumes a minimum of energy (240 W), the modification is completed with a 10 m power cord. Experts note the lightness of the model (3,4 kg), the top location of the water intake. The pump closes the top four vibration pumps.
In the reviews, the owners praise the product for its high performance, ease of use, and the ability to connect multiple sprinklers. The disadvantages include a high noise level and a short electrical wire.
Advantages
high performance;
good pressure;
low price;
upper intake.
Disadvantages
noisiness;
short cord.
The best surface pumps for wells
Surface pumps boast an excellent combination of performance and pressure. They are also good because they can be installed indoors. Thus, the risk of theft is reduced, which is especially important for summer residents. The experts were impressed by the performance of the two models.
Hammer NAC 1000A (1000 W)
Rating: 4.9
One of the most popular surface pumps in Russia is the Hammer NAC 1000A model. This is confirmed by a large number of reviews on thematic forums and on the pages of online stores. Experts explain the increased interest in the pump by a combination of high performance (4,6 cubic meters / h), good pressure (45 m) and large suction depth (8 m). The manufacturer equipped his product with a powerful electric motor (1000 W), while the pump is very quiet. Unpretentiousness should be added to the asset of the device, it is used not only to provide the house with clean water, but also to water the backyard with water from a lake or river. The pump becomes the winner of our review.
The owners flatter about excellent performance, compactness, smooth operation and high-quality assembly.
Advantages
excellent performance;
simple construction;
affordable price;
quiet work.
Disadvantages
not found.
GARDENA 3500/4 Classic
Rating: 4.8
The GARDENA 3500/4 Classic surface pump will become a reliable assistant to the gardener and gardener in the heat of summer. The model has good performance (3,6 cubic meters / h), decent pressure (41 m) and a decent suction depth (7 m). It is quite a bit inferior to the review leader in terms of power (800 W), while winning in terms of cost. Experts note the unpretentiousness of the pump, with its help you can even pump out dirty water from cellars or open reservoirs. A distinctive feature of the model is the presence of two outlets. Ergonomic handle and rubber feet for maximum comfort.
Domestic consumers are satisfied with the performance and generated pressure. At the same time, you can connect 3-4 sprinklers, which speeds up the watering of the site.
Advantages
good performance;
unpretentiousness;
high-quality assembly;
ease of use.
Disadvantages
not found.
Attention! This material is subjective, is not an advertisement and does not serve as a guide to the purchase. Before buying, you need to consult with a specialist.